Free written quote, OZEV grant help included, and fully insured installation for Oxford homes and workplaces.

Oxford has one of the highest rates of EV ownership in the South East, and it is easy to see why. Short city commutes, strong environmental awareness, and a growing network of workplace charging schemes have pushed demand well ahead of most comparable towns. If you are relying on a three-pin plug overnight or paying for public chargers near Cowley Road or the Headington retail parks, a dedicated home or workplace charger will save you time every single day.
We are MCS-certified and NAPIT-registered electricians based in Redditch, roughly 75 minutes from Oxford via the M42, M40, and A34. We install Zappi, Wallbox, and Pod Point units, handle the OZEV grant application on your behalf, and integrate the charger with any existing or planned solar array so your car charges from rooftop surplus rather than the grid. Every quote is free, written, and itemised with no hidden costs.
What's included
A pre-installation survey of your consumer unit, cable runs, and proposed charger location, confirming the route before any work begins and flagging any upgrades needed to support the new circuit.
Supply and installation of your chosen smart charger, whether Zappi, Wallbox, or Pod Point, wired on a dedicated circuit from your consumer unit with correct fusing and earthing to current BS 7671 standards.
OZEV grant application completed and submitted on your behalf where you are eligible, so you do not need to navigate the government portal or chase paperwork yourself.
Full cable concealment where property layout allows, using surface trunking or buried conduit to keep the finished installation tidy and sympathetic to the building, particularly important in Oxford's older streetscapes.
Commissioning and app setup, walking you through smart scheduling, load balancing, and solar integration settings so the charger works as intended from day one rather than running on default factory settings.
NAPIT-registered electrical sign-off, installation certificate, and before-and-after photographs provided on completion so you have a full record for insurance, future sale, or workplace compliance purposes.
Local knowledge
Oxford's housing stock covers an unusually wide range of periods and types. The Victorian and Edwardian terraces of Jericho, East Oxford, and St Clements bring narrow side returns and older consumer units that sometimes need upgrading before a 7kW charger can be added safely. Many of these properties also fall within or close to conservation areas where cable routes and external fixings need to respect the character of the street. That does not make installation impossible, it means planning the route carefully and, in some cases, discussing options with the local authority before work starts.
The interwar and postwar estates of Headington, Cowley, and Rose Hill are generally more straightforward. Detached and semi-detached garages sit close to the consumer unit, cable runs are short, and there are no conservation restrictions on the installation method. New-build developments at sites like Barton Park and the areas around the Oxford Science Park often come with a trunking provision already in place, though the charger itself still needs to be supplied and commissioned. Workplace and commercial sites, including the many research and medical campus buildings around the John Radcliffe and Churchill Hospital areas, frequently want multiple charge points installed as part of a fleet electrification programme, and we can quote for multi-unit workplace schemes alongside domestic work.
Oxford also has a notably high proportion of households with solar panels, driven by proactive city council sustainability initiatives and strong owner-occupier engagement with renewable technology. This makes solar-integrated charging, where the Zappi charger's eco-mode draws from rooftop surplus before pulling from the grid, especially relevant here. If you already have panels, or are planning to install them, we can configure the charger and the solar system to work together from the outset rather than retrofitting the integration later.
Why Oxford
Oxford customers choose us because we cover the whole job, from grant paperwork to solar integration, without subcontracting any part of it.
We are NAPIT-registered electricians and OZEV-approved installers, which means we can submit your grant application directly and issue the electrical installation certificate ourselves. You do not need a separate electrician to sign off our work.
We install Zappi, Wallbox, and Pod Point and have no commercial preference between them. We will recommend the unit that suits your property, your energy tariff, and whether you have or plan to have solar panels, not the one with the best installer margin.
Every quote is free, written, and itemised after a proper survey. There are no hidden call-out fees, no surprises on the day, and no vague estimates that grow once the job starts.
We are fully insured for domestic and commercial electrical work. Details are available on request before you commit to booking, and all work is NAPIT-registered so it is notifiable and compliant with building regulations.
Because we also install solar panels and battery storage, we can plan the charger installation as part of a joined-up energy system rather than a standalone fitting. Oxford's high solar uptake makes this genuinely useful rather than a theoretical add-on.
How it works
Enter your OX postcode on our website or call us on 01527 337155. We confirm that Oxford is within our coverage area and that we have availability before you invest any more time in the process.
We visit your property at a time that suits you, assess the consumer unit, identify the best cable route to the proposed charger location, and check whether an OZEV grant applies to your situation. There is no charge and no obligation.
You receive a written, itemised quote by email, covering all labour, materials, and any consumer unit work flagged during the survey. The price is fixed. If anything changes on the day, we discuss it before proceeding, never after.
Accept the quote and we agree a installation date that works for your schedule. We aim to offer Oxford customers a slot within two weeks of survey, subject to current workload. You receive a confirmation by email.
We complete the installation, commission the charger, walk you through the app and settings, and hand over the NAPIT certificate and installation certificate. Before-and-after photographs are sent to you the same day for your records.
Our work
A selection of our recent ev charger installation work across the Midlands.



Often booked together
Installing solar at the same time as your EV charger allows us to configure Zappi's eco-mode from the outset, so the car charges from rooftop surplus automatically. Oxford's solar adoption rate makes this one of the most common combinations we quote for.
A battery paired with your charger lets you store cheap overnight or solar-generated electricity and use it to charge the car at peak times. For Oxford households on time-of-use tariffs, this combination can significantly reduce running costs over the year.
Older Oxford terraces often need consumer unit upgrades or additional circuits before a 7kW charger can be installed safely. Combining the upgrade and the charger installation in a single visit saves time, disruption, and a second call-out fee.
Worth knowing
Oxford has several conservation areas covering parts of the city centre, Jericho, and North Oxford. External cable routes and charger housings must not harm the character of the building or street. In some cases a brief discussion with Oxford City Council's planning team is advisable before work begins, and we will flag this during the survey.
Many older Oxford terraces have split consumer units or older fuse boards that pre-date modern circuit-breaker standards. A charger requires a dedicated circuit with correct RCD protection. If the survey identifies that the consumer unit needs upgrading to accommodate this safely, we will quote for that work separately and explain why it is necessary before proceeding.
If you are renting rather than owning, you will need your landlord's written consent before an OZEV grant application can be submitted and before any fixed wiring work begins. The grant application itself is straightforward, but the consent step is often overlooked and can delay installation by weeks if not resolved early.
FAQs
For most Oxford homes, a straightforward installation on a property with a modern consumer unit and a clear cable run from the garage or driveway takes between two and four hours. If the consumer unit needs upgrading, or the cable route is complex, such as a long run through an older Jericho or East Oxford terrace, the job may take a full day. We will give you an accurate time estimate after the survey so you can plan accordingly. We do not rush the job to hit an arbitrary slot time.
The OZEV Electric Vehicle Chargepoint Grant is available to flat owners and renters in England who meet the eligibility criteria, including owning or having ordered an eligible electric vehicle. It is not currently available to homeowners with their own off-street parking, but the rules do change. As an OZEV-approved installer we check your eligibility at the survey stage and submit the application on your behalf if you qualify. There is no extra charge for the paperwork and we walk you through what is needed. Contact us to check your current eligibility before booking.
Most EV charger installations in Oxford are covered by permitted development rights and do not require a planning application. However, if your property is a listed building or sits within one of Oxford's conservation areas, such as parts of North Oxford, Jericho, or the city centre, you may need to agree the external cable route and charger housing with Oxford City Council before work starts. We flag this during the survey and can advise on what is typically acceptable, but it is always worth checking with the local authority if you are unsure of your property's status.
Yes, and Oxford's high solar uptake makes this one of the most common requests we handle. The Zappi charger, made by myenergi, is specifically designed to detect surplus generation from your solar array and divert it to charge the car before exporting to the grid. This means on a sunny day your car can charge for free from rooftop energy rather than drawing from the grid. We configure the charger and the solar system to communicate correctly during installation. If you are planning solar alongside the charger, we can install and commission both in a coordinated programme.
We install Zappi by myenergi, Wallbox, and Pod Point. All three are smart chargers that connect to your home Wi-Fi, allow scheduled charging to take advantage of cheaper overnight tariffs, and provide app-based monitoring. We do not have a commercial arrangement that pushes us toward one brand. We will recommend the unit that best suits your property setup, your energy tariff, and whether solar integration is a priority for you. All brands we install are compatible with OZEV grant requirements where applicable.
Yes. We quote for workplace charging schemes alongside domestic installations. Oxford has a significant number of research campuses, medical facilities, and commercial premises looking to add charge points for staff and fleet vehicles. Workplace installations may qualify for separate government grant support through the OZEV Workplace Charging Scheme. We assess your site, advise on the number and positioning of units, and handle the grant application process. Every commercial quote is free, written, and based on a proper site survey rather than a phone estimate.
Our commitment
We take on a limited number of installations each week so that every job gets a proper survey, a clean installation, and a full handover rather than a rushed fit-and-run. Oxford is at the edge of our travel radius, which means when we are on site we stay focused and do not cut corners to make the drive back easier. You get the same standard of work we deliver five minutes from our Redditch base.
Who we are
Djuka Electrics is based in Beoley, Redditch, Worcestershire. We are NAPIT-registered electricians and OZEV-approved EV charger installers working across the Midlands and into Oxfordshire. We share real installation photos and verified customer reviews, and we are happy to put you in touch with recent Oxford customers before you commit to booking.
Nearby
Send your postcode and a few details. Within 24 hours you’ll have an honest, written quote from a qualified Midlands electrician, no pushy sales calls, no hidden charges.