Fast-response electrical call-outs across Oxford, fully insured and NAPIT-registered, with a free written quote and no hidden costs.
When the power drops or a burning smell appears from a socket, you need someone who can get to Oxford quickly and diagnose the fault properly. We cover the full OX1 to OX4 postcode area, from the historic city centre to Headington, Cowley, Botley and beyond. Whether your consumer unit has tripped and will not reset, a circuit has failed, or you can smell scorching from the wiring, we attend, fault-find, and make safe before anything else.
What separates us from a local pick-up-and-go crew is that we are NAPIT-registered, so every emergency repair we carry out is done to a documented standard. We do not patch and leave. Every job gets a written assessment, and if further remedial work is needed you receive a clear, itemised quote before we touch anything beyond the immediate make-safe. No guesswork, no surprise costs.
What's included
A full verbal and visual assessment of the fault on arrival, including consumer unit, affected circuits, and any visible wiring, so we understand the complete picture before starting work.
Immediate isolation of any unsafe circuit or component to make your property safe, followed by a plain-English explanation of what went wrong and what the fix involves.
Fault-finding across the full electrical installation using calibrated test equipment, covering dead circuits, RCD failures, overloads, loose connections, and wiring faults behind switches and sockets.
Physical repair or replacement of the failed component where parts are carried on the van, including MCBs, RCDs, sockets, fused spurs, and consumer unit components.
A written record of all tests carried out and work completed, left with you at the end of the job, so you have documentation for insurance purposes or future reference.
A free, itemised written quote for any follow-on remedial work identified during the call-out, with no obligation and no pressure, before we leave your property.
Local knowledge
Oxford is a city of layered building stock, and that layering matters enormously for electrical fault-finding. The central conservation areas around Jericho, St Clement's, and the old city core contain Victorian and Edwardian terraced housing where original wiring has sometimes been partially updated over decades rather than replaced wholesale. The result is installations with mismatched generations of cable, fuse boards that were never converted to modern consumer units, and ring mains interrupted by extensions added without proper certification. When faults develop in properties like these, they can be harder to trace because the installation does not follow a clean, modern layout.
Moving out to Headington, Cowley, and Rose Hill you encounter large numbers of 1950s to 1970s council-era and owner-occupied semis. These properties frequently still have consumer units that were adequate for the electrical loads of that era but are now running significantly more demand: multiple high-powered appliances, home-working equipment, EV chargers, and sometimes solar battery systems. An overloaded or ageing consumer unit in a Cowley semi is one of the more common reasons we get called to Oxford. In newer developments around Barton and the eastern fringes, the wiring is more modern but faults still occur, particularly where developer-installed circuits have been extended by subsequent owners without proper documentation.
Oxford also has a notably high concentration of rental properties managed by landlords who may be based elsewhere. When a fault develops in a tenanted house, the pressure to resolve it quickly is real, both for the tenant's welfare and the landlord's legal obligations. We understand that dynamic and we can communicate directly with whichever party is on-site and whichever is making the decision, providing written documentation that satisfies both. The city's strong EV uptake also means we regularly encounter charging-related faults, including tripping caused by charger installation wiring that was not correctly commissioned, which sits comfortably alongside our EV charger installation work.
Why Oxford
Oxford property owners and landlords call us back because we document everything, work to a registered standard, and never leave a job half-resolved.
We are NAPIT-registered, meaning our emergency electrical work is carried out to a formal, inspectable standard. You are not relying on a sole trader working off their own say-so; the registration body holds us accountable.
We carry full public liability and employer's liability insurance, so if anything goes wrong on your property during a call-out, you and we are properly covered. You can ask to see the certificate before we start.
Every job produces a written record. Whether you are a homeowner needing documentation for a mortgage survey or a landlord satisfying a compliance requirement, you leave the job with paper in hand, not just a verbal assurance.
We fault-find rather than guess. We bring calibrated test equipment and trace the actual cause before recommending any repair, which means we do not replace components unnecessarily or quote for work that is not needed.
We cover the full Oxford postcode area from our Midlands base via the M40 and A34. For landlords with multiple properties or HMO managers with urgent tenant issues, we can co-ordinate access and documentation across a visit efficiently.
How it works
Tell us your OX postcode when you call. We confirm coverage, give you an honest travel estimate from our Redditch base via the M40, and note any access or safety information we need before attending. No holding music, no call centres.
We walk the property with you, look at the consumer unit, the affected circuits, and any visible symptoms before touching anything. This assessment costs you nothing and lets us understand the fault properly rather than making assumptions from the doorstep.
For any work beyond the immediate make-safe, you receive a written, itemised quote before we proceed. No verbal estimates, no add-ons later. If you want time to consider, we make the property safe and leave you to decide at no pressure.
Once you accept the quote, we agree a return date and time that suits your schedule. For landlords co-ordinating tenant access, we can communicate directly with the tenant to arrange entry without adding to your workload.
We complete the repair, run all relevant tests, and hand you a written record of the work including test results and any certification required. Before and after photographs are taken as standard so you have a clear record of what was found and what was fixed.
Often booked together
A fault-finding call-out often reveals that the broader installation has not been formally inspected. An EICR after an emergency repair gives landlords the compliance documentation they need and homeowners a clear picture of the full installation condition.
Oxford's high EV uptake means tripping faults are sometimes traced to a charging circuit. If the charger installation is found to be the root cause, we can quote to correctly commission or upgrade the dedicated circuit at the same visit.
Emergency make-safe work often uncovers outdated wiring, undersized consumer units, or circuits that need proper remediation. Booking a domestic electrical survey after the call-out avoids repeat faults and brings the whole installation up to standard.
Worth knowing
Oxford has a significant volume of listed buildings and conservation-area properties, particularly in the OX1 and OX2 postcodes. Emergency make-safe work is generally permitted without consent, but any subsequent remedial installation work that involves visible alterations to a listed building may require listed building consent before it is carried out.
Many Oxford properties, especially older terraces and converted flats, share party walls and communal services. Before isolating a circuit or meter, check whether the supply feeds shared equipment such as communal lighting or a shared heat system, to avoid unintended disruption to neighbouring occupants or common areas.
Oxford's high rental density means landlords have a legal duty to ensure electrical safety. If a fault is identified during a call-out that reveals a wider installation deficiency, an EICR may be required before the property is re-let. We can advise on this and provide a written assessment to support the landlord's compliance obligations.
FAQs
We are based in Redditch and travel to Oxford via the M42 and M40, which typically takes around 75 minutes in normal traffic conditions. We will give you an honest arrival estimate when you call, not a vague window. For true emergencies such as a burning smell from wiring or a complete loss of power with no obvious cause, we prioritise attendance. Call us on 01527 337155 and we will tell you exactly where we are and when to expect us.
No. The initial call-out and fault assessment is covered under our free quote process. We attend, diagnose the fault, make the property safe if there is an immediate risk, and then give you a written, itemised quote for any repair work before we proceed. There are no hidden call-out fees added after the fact. If you decide not to go ahead with the repair, we leave you with a written record of what was found. We never start chargeable work without your written agreement.
Repeated tripping usually means one of three things: an overloaded circuit drawing more current than the MCB or RCD is rated for, a developing fault in an appliance connected to that circuit, or a deteriorating connection somewhere in the wiring causing an intermittent earth fault. In older Oxford properties, particularly Victorian and Edwardian terraces with mixed-generation wiring, the cause is sometimes a poorly made joint hidden inside a wall or ceiling. We use calibrated test equipment to trace the actual fault rather than guessing. A written quote covers any repair identified.
Yes, treat it as one. A burning smell from a socket, switch, or consumer unit almost always indicates a loose or failing connection generating heat. Left unattended, this can cause a fire inside the wall or within the back box. Switch off the circuit at the consumer unit if you can identify it, unplug anything connected to the affected socket, and call us immediately. Do not use the socket or circuit again until it has been inspected. We will attend, identify the cause, and make the circuit safe before anything else.
Yes, this is a significant part of our Oxford work. We can communicate directly with your tenant to arrange access, attend the property, carry out the fault assessment, and send you a written report and quote without requiring you to be on-site. If the fault reveals a wider installation issue that needs an EICR to satisfy your compliance obligations as a landlord, we will flag that clearly and quote separately. All documentation is produced in a format suitable for insurance or local authority requirements.
Yes, we do, but we are careful to distinguish between emergency make-safe work, which does not normally require listed building consent, and subsequent remedial installation work, which may do. If we attend a listed property in Oxford's conservation areas and the fault requires a fix that involves visible alterations such as surface-run conduit or new external fittings, we will advise you on the likely consent position before proceeding. We will never carry out work that could compromise your listed building status without ensuring you understand the planning context first.
Our commitment
We take on a controlled number of call-outs each week rather than running a high-volume dispatch model. That means when we attend your Oxford property, the person doing the fault-finding is qualified, focussed, and not rushing to reach the next job. Electrical faults diagnosed in a hurry often get the wrong fix. We would rather get it right once than leave you calling someone out again.
Who we are
Djuka Electrics is based in Beoley, Redditch, Worcestershire, and covers a wide area across the Midlands and South East, including the full Oxford postcode area. We are NAPIT-registered electricians and MCS-certified solar installers. Every job we attend is photographed and documented. Our reviews reflect real jobs at real addresses, not testimonials written for a website.
Nearby
Helpful reading
Send your postcode and a few details. Within 24 hours you’ll have an honest, written quote from a qualified Midlands electrician, no pushy sales calls, no hidden charges.