Domestic Electrician in Bedworth
Free written quotes, fully insured, NAPIT-registered electricians covering Bedworth and the surrounding Warwickshire area.
Bedworth sits between Coventry and Nuneaton, and the housing stock here reflects that position: a solid mix of post-war council-built semis, 1970s and 1980s private estates, and older terraces closer to the town centre. Many of these homes carry original wiring that is now past its safe working life, and consumer units that predate modern RCD protection. Whether you need a full rewire, a fuse box upgrade, an EICR for a rental property, or simply a few extra sockets, we cover the whole of Bedworth and the surrounding CV12 and CV7 postcodes.
We are NAPIT-registered, which means every job we complete is certified to current BS 7671 wiring regulations and, where required, notified to building control on your behalf. You do not have to manage paperwork or chase certificates. We carry full public liability and employer's liability insurance, and every quote is free, written, and itemised before any work starts. No surprises on the invoice.
What's included
Every Bedworth job includes.
A thorough visual inspection and discussion of your requirements before any work begins, so we agree the exact scope, access arrangements, and timescales together before we lift a single floorboard or open the consumer unit.
Full or partial rewire using current-spec cable and accessories throughout, with all work tested to BS 7671 and a signed Electrical Installation Certificate issued at completion so you have proper documentation for your records or conveyancer.
Consumer unit (fuse box) replacement with a modern dual-RCD or RCBO-protected board, giving your home the level of fault and shock protection that current wiring regulations require, and improving safety for every circuit in the property.
EICR (Electrical Installation Condition Report) for landlords and homeowners, covering a thorough inspection and test of your existing installation with a clear written report showing any code-C1, C2, or C3 observations and what they mean in plain English.
Additional sockets, USB outlets, fused spurs, and lighting circuits added cleanly and chased into walls where possible, with all new work tested, certified, and notified to building control so it meets permitted-development and mortgage-lender requirements.
Electrical fault-finding using calibrated test equipment to trace tripping breakers, dead circuits, persistent RCD trips, or intermittent faults, with a clear diagnosis and a fixed scope of remedial work agreed before we proceed.
Local knowledge
Electrician in Bedworth.
Bedworth's residential streets contain a significant proportion of homes built between the 1940s and the 1980s. Properties in areas such as Exhall, Ash Green, and Keresley End often still contain wiring installed at the time of construction, which may include older rubber-insulated or PVC cables that have reached or exceeded their design life. These installations are not automatically dangerous, but they do need a proper EICR assessment to confirm their condition. If you have bought or are buying a property in this part of Warwickshire and have not seen a recent electrical certificate, that is the sensible first step.
Landlord electrical compliance is a live issue across Bedworth. The private-rented sector here is active, with many terraced and semi-detached properties let to tenants who commute into Coventry or Nuneaton. Since the introduction of mandatory five-yearly EICRs for private landlords in England, demand for condition reports in the CV12 postcode has grown steadily. We carry out EICR inspections to the current 18th Edition standard and can carry out any remedial work identified at the same time, reducing the number of separate visits and keeping your property compliant without unnecessary delay.
Consumer unit upgrades are among the most common jobs we carry out in Bedworth. Older split-load boards and fully-fused units without RCD protection do not meet current standards and can slow down or complicate a property sale. Many local solicitors and mortgage surveyors now flag non-compliant boards as a condition of completion. Replacing the board is a straightforward job for a registered electrician, and the new installation certificate we issue satisfies both building control notification requirements and the documentation trail your conveyancer needs.
Why Bedworth
Why Bedworth chooses us.
Bedworth homeowners and landlords choose us because we are registered, insured, and transparent about what every job involves before we start.
NAPIT registration means every installation we complete is certified to BS 7671 and self-notified to building control on your behalf. You receive a proper Electrical Installation Certificate or EICR with every job, not a handwritten note.
We carry full public liability and employer's liability insurance, so your property and our operatives are covered throughout. You can verify our NAPIT registration independently before booking.
Every quote is free, written, and itemised. We survey the job first, explain what we have found, and send you a clear breakdown. There are no hidden costs added after the work is complete.
We cover the whole of Bedworth and the surrounding CV12 and CV7 postcodes from our Redditch base, which puts us within straightforward reach without the call-out premiums that Coventry city-centre firms sometimes apply to outlying areas.
We carry out fault-finding, remedial work, and new installations ourselves rather than subcontracting. The same qualified electrician who surveys your property carries out the work, so nothing is lost between the quote and the job.
How it works
From enquiry to job done.
- 01Postcode check
Tell us your CV12 or CV7 postcode and we confirm coverage straight away. Bedworth falls well within our operating area, so this is normally a formality rather than a barrier.
- 02Free survey
We visit the property at a time that suits you, inspect the installation or the area where work is needed, and ask the questions that let us scope the job accurately. There is no charge for the survey.
- 03Written quote
We send you a clear, itemised written quote covering labour, materials, any building-control notification fees, and the certification you will receive on completion. No estimates, no ranges, no surprises.
- 04Date booked
Once you accept the quote, we agree a start date that works for you. We confirm everything in writing so you have a clear record of what is happening and when.
- 05Job done, photos sent
We complete the work, carry out all required testing, and issue the relevant certificate (EIC or EICR). We send before-and-after photos so you have a visual record alongside the paperwork.
Our work
Recent Domestic Electrics installs.
A selection of our recent electrician work across the Midlands.
Often booked together
Pairs well with.
Many Bedworth homeowners fitting an EV charger need a dedicated circuit and sometimes a consumer unit upgrade at the same time. Combining both jobs in a single visit saves time and keeps the certification straightforward.
CCTV systems need a reliable mains supply and often a dedicated fused spur. Booking electrical work and CCTV installation together means the cabling is planned and routed neatly from the outset.
Solar panel installations require an NAPIT or MCS-certified electrician to connect the inverter and carry out the AC wiring. Combining solar with a consumer unit check or upgrade is efficient and avoids a second mobilisation.
Worth knowing
Before you book in Bedworth.
Older Bedworth properties, particularly terraced homes close to the town centre, may have wiring routed through original timber joists and solid-wall cavities. Accessing cables for a partial rewire or additional circuits can add time to the job; we will identify this during the survey and reflect it accurately in the written quote before work starts.
Landlords in Bedworth must hold a valid EICR for every privately rented property, renewed at least every five years or at each change of tenancy if sooner. If your report identifies code-C1 or C2 observations, remedial work must be completed and evidenced before you can issue a compliant certificate to your tenant or local authority.
Any new circuit or consumer unit installed by a NAPIT-registered electrician is notified to building control as a Part P self-certification. This keeps your property records straight and avoids the retrospective inspection fees that can arise when undocumented electrical work is discovered during a sale or remortgage survey.
FAQs
Bedworth questions.
How long does a full house rewire take in Bedworth?
The time depends on the size and layout of the property. A typical three-bedroom semi in Bedworth takes between three and five working days for a full rewire, including first and second fix and the final test and certification. Older properties with solid walls, original timber floors, or awkward routing can add time. We assess this during the free survey and give you a realistic programme before work starts, so you can plan access and any temporary accommodation if needed.
Do I need an EICR as a landlord in Bedworth?
Yes. Private landlords in England are required by law to have a valid Electrical Installation Condition Report for every rented property, renewed at least every five years. The report must be carried out by a qualified person and a copy provided to tenants and, on request, to the local authority. If the report identifies code-C1 or C2 observations, you must carry out remedial work and obtain written confirmation of completion. We carry out EICR inspections across Bedworth and the CV12 postcode and can complete any remedial work identified at the same visit where practical.
What is involved in a consumer unit upgrade in Bedworth?
A consumer unit replacement involves isolating the supply, removing the old board, fitting a new unit with modern RCD or RCBO protection on every circuit, and carrying out a full test of the installation before reconnecting. We notify the work to building control under Part P self-certification as part of the job, and you receive a signed Electrical Installation Certificate at completion. The work typically takes one day for a standard domestic property. If the existing wiring has issues that need addressing first, we will identify these during the survey and include them in the written quote.
Can you add extra sockets or a new lighting circuit to my Bedworth home?
Yes, adding circuits or extending existing ones is a common domestic job we carry out across Bedworth. All new circuits are run in current-spec cable, tested on completion, and notified to building control under Part P. We chase cables into walls where possible to keep the finish tidy, and we discuss the routing and any making-good requirements with you before we start. The work is included on a single certificate along with any other electrical work carried out at the same visit, keeping your documentation clean and complete.
How do I know the quote will not change once work starts?
Our quotes are written and itemised after a physical survey of the property, not estimated over the phone. We identify access constraints, the condition of existing wiring, and any related work required before we commit to a price. If something genuinely unforeseen is discovered once work begins, we stop and discuss it with you before proceeding. We do not add costs without your agreement. There are no call-out fees, no hidden material uplifts, and no rounding-up on completion. The figure on the quote is the figure on the invoice unless you request additional work.
Are you able to carry out electrical work for small businesses in Bedworth?
Our domestic electrical service covers residential properties, buy-to-let portfolios, and small commercial premises such as offices, shops, and light industrial units. If you have a business property in Bedworth that needs fault-finding, additional circuits, or an EICR for insurance or lease compliance, get in touch and we will confirm whether the scope falls within our service. For larger commercial projects, our commercial solar and electrical division handles dedicated commercial installations. Either way, the process starts with a free site visit and a written quote at no obligation.
Our commitment
We take on a controlled number of jobs each week so that every installation gets the attention it needs. Electrical work is not an area where cutting corners pays off; a missed test or an undocumented circuit can cause real problems at the point of sale or, more seriously, in daily use. Keeping our diary manageable means the electrician on your job is focused on your property, not rushing to reach the next appointment.
Who we are
Djuka Electrics is based in Beoley, Redditch, and covers a wide area of the Midlands including Bedworth and the surrounding Warwickshire towns. We are NAPIT-registered for domestic electrical work and MCS-certified for solar installations. Every job comes with real photos and documented certification. You can read genuine customer reviews before you book, and our registration details are publicly verifiable.
Nearby
Domestic Electrics near Bedworth
Helpful reading
Guides worth a read.
Ready for your free electrician quote in Bedworth?
Send your postcode and a few details. Within 24 hours you’ll have an honest, written quote from a qualified Midlands electrician, no pushy sales calls, no hidden charges.